How to Install a Whirlpool Electric Dryer - An Easy-to-Follow Guide

Installing a Whirlpool electric dryer is a straightforward job that almost anyone can handle. After all, it’s just a matter of connecting the power cords, connecting the venting hose, and installing the new washer into a designated space. However, for even the most seasoned DIY-er, a little guidance never hurts. That’s why we’ve compiled this complete guide that provides step-by-step instructions for a successful and safe installation.

An electric dryer requires a dedicated electrical outlet with a ground fault circuit interrupter (GFCI). Make sure that your existing outlet is up to code, and confirm that it is labeled at least 220v or 240v, sufficient to power a 20 or 30 amp electric dryer. Before you begin any work, you should also double-check that the appliance has the correct voltage rating. If you’re not sure, consult an electrician to ensure that the connection is safe and compliant with local codes.

Step-By-Step Whirlpool Electric Dryer Installation Instructions

Installing a Whirlpool electric dryer is a relatively simple process as long as you have access to an existing electric outlet. But before you get started, be sure to turn off the power and unplug the appliance.

1. Preparing the Space

Begin by measuring your chosen space to ensure the appliance will fit comfortably in the area. You’ll also need access to an existing 220v or 240v electrical outlet, as well as a working venting system.

2. Installing the Power Cord

Using the power cord provided in the kit, connect the terminals located on the back of the electric dryer to the electrical outlet. It’s important to use the manufacturer’s specific power cord as its prongs are designed to fit the terminals on your appliance.

3. Connecting the Venting Hose

If you’re planning to vent your Whirlpool electric dryer to an outside wall, measure the distance from the back of the dryer to the vent outlet, and cut the flexible exhaust tube accordingly. Using the provided clamps and screws, attach the venting hose to the back of the appliance and the outside wall.

4. Securing the Electric Dryer to the Wall

Place the electric dryer in the desired location and secure it to the wall with two lag screws.

5. Finishing Up

Once everything is securely in place, plug in the appliance. As a final step, you may want to vacuum underneath the dryer to keep dust and dirt away.

Tips for Ensuring a Successful Whirlpool Electric Dryer Installation

Installation is an important part of the setup process, and ensuring that the appliance is properly connected and secured is paramount. Here are a few tips to consider to make sure the job is done right:

Make sure the power cord is plugged in to a working GFCI outlet.

Vent tubing should be as short and straight as possible to ensure efficient operation.

Always use clamps and screws to attach the vent tubing.

Ensure that the electric dryer is level and secured to the wall to prevent shifting or vibration.

By following the steps laid out in this guide and keeping these tips in mind, you can rest assured that your Whirlpool electric dryer installation will be as smooth as possible.

Clothes Dryer Manuals Free Installation Operation Guides Manufacturer Contact Info