DIY Nutone Bathroom Fan Motor Replacement Instructions

If you have a Nutone bathroom fan in your home and it needs a new motor, the best way to get the job done is to install it yourself. Not only will you save money on the cost of labour, but you’ll also get to enjoy the satisfaction of doing it yourself. Replacing the motor in your Nutone bathroom fan is a straightforward process that requires minimal tools, making it a great DIY project even for those without a lot of experience with home repairs.

This guide will help walk you through the entire process step-by-step so that you can replace your Nutone bathroom fan motor quickly and confidently. We'll cover the tools and materials you need, the safety precautions to take, and how to replace the motor itself.

Tools & Materials Needed For Replacement

Replacing the motor in your Nutone bathroom fan is a relatively simple task, but it does require a few specific tools. It's recommended that you obtain all the necessary supplies before beginning the process.

Safety glasses

Screwdriver

Nutone replacement motor

Wire stripper

Wire connectors

Safety Precautions

Before starting any repair process, it's important to take proper safety precautions. This will help ensure that the job is completed safely and correctly.

Turn off power to the fan at the circuit breaker before beginning.

Do not attempt to work on electrical components while standing in water or wet conditions.

Be sure to wear safety glasses when working on any type of electrical component.

Make sure the replacement motor is compatible with your existing Nutone fan.

Replacement Process

Once you have gathered all the necessary tools and supplies and taken the appropriate safety precautions, you can begin the process of replacing the motor. This job should take about 30 minutes or less to complete.

Remove the cover from the fan housing by unscrewing the screws on either side of the unit.

Disconnect the wires from the existing motor and remove it from the fan housing.

Strip the insulation from the ends of the wires using the wire stripper.

Connect the wires to the new motor using the wire connectors. Be sure to use the same color wires for the connection.

Secure the motor to the fan housing with the mounting screws.

Replace the cover to the fan housing and secure with the screws.

Turn the power back on at the circuit breaker.

Test the fan to make sure it is working properly.

Conclusion

Replacing the motor in your Nutone bathroom fan is a relatively simple task that can be done in less than an hour and without the need for special tools or parts. As long as you have the right supplies and take the necessary safety precautions, you can have the job done in no time. And once you're finished, you can enjoy the satisfaction of having completed the job yourself.

Nutone 60 Cfm Quick Install Bathroom Exhaust Fan Motor And Grille Upgrade Kit Four Pack